Coated End
Coated End
 |
 8 P T Coated 4 Flute Corner Rounding End Mill Set Mills  US $87.95
|
 Resharpened Ball Lot 13 Garr Tool 3 8 2 F CARBIDE COATED END MILL 4 long US $31.00
|
 Resharpened Lot 5 USA 3 4 4 F CARBIDE COATED END MILL 4 and 5 1 2 long US $59.02
|
 Resharpened Lot 2 USA 5 8 4 F CARBIDE COATED END MILL 6 long US $15.50
|
 Lot 7 Design Rite XL 1 2 4 FLUTE CARBIDE COATED END MILL 3x1 030 CENTER CUT US $112.40
|
 3 New 1 4 Dia Carbide End Mills Coated US $25.00
|
 3 8 2 FLUTE AlTiN COATED SINGLE END STUB SOLID CARBIDE END MILL USA US $15.33
|
 NEW OSG TIALN COATED 22MM X 22MM CARIBDE END MILL 2FL US $55.00
|
 NEW 1 4 INCH DIA MORSE SOLID CARBIDE 4 FLUTE END MILL DOUBLE END TICN COATED US $25.00
|
 KEO 5 64 X 1 8 3 FLUTE CARBIDE STUB END MILL 87004 TICN Coated USA NEW US $9.15
|
 KEO 3 64 X 3 32 3 FLUTE CARBIDE STUB END MILL 87002 TICN Coated USA NEW US $9.15
|
 3 16 x 5 8 x 2 4FL BALL END CARB EM ALTIN COATED 417 US $5.99
|
 3 NIAGRA 1 SINGLE END MILL 3 4 SHANK2FL COATED RESH US $30.00
|
 1 NEW SOLID CARBIDE ENDMILLS 1 2 DIAMETER 2 FL DOUBLE END COATED Z762 US $19.95
|
 1 1 4 NIAGARA CUTTER 6 FLUTE COATED COBALT ROUGER END MILL LOT OF 2 US $120.00
|
 KEO 5 64 X 1 8 3 FLUTE CARBIDE STUB END MILL 87004 TiALN Coated USA NEW US $9.20
|
 KEO 3 64 X 3 32 3 FLUTE CARBIDE STUB END MILL 87002 TiALN Coated USA NEW US $9.20
|
 20 pc Tin Coated End Mill Set 2 4 Flutes Cutting tool US $51.99
|
 Solid Carbide SER 14 1 2 TI NAMITE Coated End Mill Double Ended US $60.00
|
 SER 14B 3 8 TI NAMITE Coated Ball End End Mill Double Ended Carbide US $20.00
|
 Carbide Tin Coated High Helix 1 3 Flutes 3 FL End Mill US $65.00
|
 Micro 100 BLR 001 4x 4 Flute 30 Deg Ball Nose Long Reach Coated End Mill US $307.79
|
 Micro 100 BLR 001 2X 2 Flute 30 Deg Ball Nose Long Reach Coated End Mill US $307.79
|
 Micro 100 BLR 625 4X 5 8 4 Flute 30 Deg Ball Nose Long Reach Coated End Mill US $124.49
|
 LOT OF 3 NEW 1 2 END MILLS 2 SOLID CARBIDE 1 HSS COATED BALL AND FLAT US $24.95
|
 Micro 100 BLR 375 4X 4Flute 30 degree Ball Nose Long Reach Coated Carbide End Mi US $45.64
|
 8 new FULLERTON 1 16 Solid Carbide End Mills 2FL SE TiN Coated 35822 US $69.25
|
 Micro 100 GLR 437 4X 4F 30 degree Long Reach Coated Carbide End Mill US $62.24
|
 Micro 100 SDH 625 03X 3Flute 60 degree High Helix Coated Carbide End Mill US $81.33
|
 LOT OF 1 NEW HSS DOUBLE END MILLS 3 8 DIA X 3 8 SHANK 4 FLUTE GOLD COATED US $9.99
|
 new TITAN 5 8 SE 4FL Solid Carbide End Mill Reg Variable Helix TiALN Coated US $59.77
|
 7 16 PROMAX CARBIDE ROUGHER ROUGHING ALTIN Coated End Mill NEW USA 100 02814 US $29.99
|
 New 1 8 CARBIDE TIALN Ball Coated end mill 4 flutes US $6.99
|
 NEW 3 Lot Atrax 4 Flute Centercutting TiN Coated Ball Single End Mills Mill 1 16 US $29.99
|
 NEW 2 Lot Atrax 4 Flute Centercutting TiN Coated Ball Single End Mills Mill 1 16 US $19.99
|
 Niagara Tin Coated 5 8 Four Flute Single End Carbide End Milling Bits NEW US $9.99
|
 Micro 100 SDH 437 03X 3Flute 60 degree High Helix Coated Carbide End Mill US $43.98
|
 Micro 100 GLR 437 4X 4Flute 30 degree Long Reach Coated Carbide End Mill US $62.24
|
 Micro 100 SDH 000 03X 1 3 Flute 60 Deg High Helix Coated End Mill US $186.29
|
 Micro 100 SDH 375 03X 3Flute 60 degree High Helix Coated Carbide End Mill US $29.04
|
 Micro 100 BLR 312 4X 4Flute 30 deg Ball Nose Long Reach Coated Carbide End Mill US $40.66
|
 Micro 100 SDH 562 03X 9 16 3 Flute 60 Deg High Helix Coated End Mill US $74.69
|
 4 lightly used garr solid carbide coated end mills4 flute US $19.99
|
 Micro 100 SDH 437 04X 7 16 4 Flute 60 Deg High Helix Coated End Mill US $42.49
|
 Micro 100 SDH 250 03X 1 4 3 Flute 60 Deg High Helix Coated End Mill US $21.24
|
 Micro 100 SDH 281 03X 9 32 3 Flute 60 Deg High Helix Coated End Mill US $25.49
|
 new GREENFIELD 3 4 x 1 5 8 4FL SE HSS TiN Coated End Mill 41033V USA US $28.52
|
 2 new GREENFIELD 1 x 3 4 x 1 1 2 2FL SE HSS TiN Coated End Mills 45075V USA US $73.44
|
 20 TIALN Coated 3 4 x 1 5 8 Cobalt Roughing End Mills US $359.95
|
 4 NEW Niagara Carbide endmills 3 8 Dia four flute single end TIN coated US $20.00
|
 5 32 BALL END MILL CARBIDE 4 FLT NIAGARA TIN COATED NEW IN PKG US $9.99
|
 NIAGRA 82360 1 1 8X1X4 1 8 TIN COATED SINGLE END MILL US $58.06
|
 Niagra Cutter TiALN Coated End Mill Assortment US $150.00
|
 MICRO 100 8mm 4 FLUTE AlTiN COATED CARBIDE METRIC END MILL HMRM 080 4X USA NEW US $32.15
|
 1 PIECE KENNAMETAL 1 4 4 Flute Single End Mill 1 1 2 LOC Tin Coated NIB US $32.99
|
 2 PIECE KENNAMETAL 3 16 4 Flute Single End Mill 3 4 LOC Tin Coated NIB US $35.99
|
 3 PIECES KENNAMETAL 1 4 4 Flute Single End Mills 1 1 8 LOC Tin Coated NIB US $54.99
|
 3 PIECES KENNAMETAL 19 64 3 Flute Single End Mills 13 16 LOC Tin Coated NIB US $19.99
|
 5 PIECES KENNAMETAL 21 64 4 Flute Single End Mills 100 LOC Tin Coated NIB US $79.99
|
 7 PIECES KENNAMETAL 15 64 3 Flute Single End Mills 3 4 LOC Tin Coated NIB US $74.99
|
 6 PIECES KENNAMETAL 1 4 4 Flute Single End Mills 3 4 LOC Tin Coated NIB US $29.99
|
 3 8 CARBIDE CUTTERS end mills 4 flutes coated US $4.99
|
 Dura Mill Dia 1 2 ULT 50500 5 Flute 5fl Coated C8 Hardlube NEW endmill End Mill US $60.00
|
 3 Flute SGS 30802 SER 5 1 2 TI Namite C Coated Endmill End Mill 3Fl US $40.00
|
 Dura Mill LEM 40500 Dia 1 2 4 Flute 4fl Coated C2 TICN End Mill Endmill Duramil US $55.00
|
 20 Pc Titanium Coated End Mill Set 24 Flutes Cutting Tools Sharp HSS Bits Case US $65.99
|
 NEW 1 4F FINISHED CARBIDE COATED END MILL 1 x 1 1 4 x 44 US $59.99
|
 SET OF 3 PCS 3F COATED 1 1 2 ROUGHING END MILLS US $49.99
|
 NEW 1 4F ROUGH CARBIDE COATED END MILL 1 x 11 4 x 4 5 8 US $49.99
|
 OSG NEW 6 OSG Carbide End Mill Tialn Coated 1 2 Dia 3 Cut Length US $120.00
|
 8 5 32 Solid Carbide Endmills end mills 3 Flutes TiN coated SSA ball nose USA US $64.72
|
 3 Flute 1 1 4 Coated End Mill US $40.00
|
 1 X 1 1 2 4 FLUTE MONSTER CARBIDE TIALN COATED END MILL USA NEW 206 001264 US $128.23
|
 Carbide End Mill 5 8 x 5 8 x 2 x 52 x 8 lg Hanita 6 flute TiCN coated US $29.99
|
 KEO 085 3 FL Long Reach CARBIDE BALL END MILL Diamond Coated 86038 AD USA NEW US $17.35
|
 KEO 080 3 FL Long Reach CARBIDE BALL END MILL Diamond Coated 86037 AD USA NEW US $17.35
|
 KEO 075 3 FL Long Reach CARBIDE BALL END MILL Diamond Coated 86036 AD USA NEW US $16.75
|
 TOSHIBA TUNGALOY 16MM 4 FLT TiN COATED END MILL US $49.95
|
 End mill cutter 8mm carbide coated TCT TiALN 4 flute AMAYA US $28.30
|
 2 new GREENFIELD 9 16 x 1 2 x 1 1 4 2FL SE TiN Coated HSS End Mills 45032V US $43.50
|
 new GREENFIELD 1 2 x 1 1 4 4FL SE TiN Coated HSS End Mill 41015V US $17.49
|
 NEW OSG HSS CO DE END MILL 3 4 X 3 4 X 1 5 8 X 5 5 8 TICN COATED US $18.00
|
 2 NEW Niagara Carbide endmills 3 4 Dia four flute single end TIN coated US $110.00
|
 1 4 CARBIDE ball dark coated END MILL 4 flutes US $4.99
|
 1 8 carbide Double ball End Mill 4 flutes coated with 3 8 shank US $4.99
|
 Design Rite XL 1 2 3flt solid carbide TiCn coated ball end 3 LOC 6 OAL US $65.00
|
 20 Piece Titanium Nitride Coated End Mill Set US $99.99
|
 2 pieces KENNAMETAL 23 64 3 Flute Single End Mills 7 8 LOC Tin Coated NIB US $39.99
|
 2 pieces KENNAMETAL 1 4 2 Flute Single End Mills 3 4 LOC Tin Coated NIB US $29.99
|
 NEW 1 8 x 3 4 l o c DE TiN coated PUTNAM End Mill 2 FL US $10.35
|
 End mill HSS 10mm M6P5K5 TiN coated 4 flute cutter tool milling face bit 3 8 US $16.00
|
 New Hanita 1207 M 42 Cobalt 1 1 2 6 Flute Coated End Mill Free Shipping US $140.00
|
 CARBIDE 1 8 2 FLUTE STUB LENGTH END MILL 1 8 SHANK NIAGARA USA NEW TIN COATED US $14.95
|
 CARBIDE 1 2 2 FLUTE STUB LENGTH END MILL 1 2 SHANK NIAGARA USA NEW TIN COATED US $24.95
|
 CARBIDE 5 8 2 FLUTE WITH FLAT FLAT STUB END MILL BASSETT USA NEW TIN COATED US $24.95
|
 KEO 85014 AD 5 64 3 Flute Long Carbide Ball Nose Diamond Coated End Mill US $29.74
|
 KOREAN IMPORT 1101 7502 3 16 Solid Carbide TiCN Coated 3 Flute Ball End Mill H7 US $12.95
|
 MICRO 100 3mm 5 FLUTE METRIC CARBIDE ALTiN COATED END MILL ARMM 030 5X USA NEW US $14.99
|
 KOREAN IMPORT 1101 7726 1 8 Solid Carbide TiAlN Coated 2 Flute End Mill i2 US $7.95
|
|
Chain End Tie Down,2 In W,27 Ft L Coated - LIFTALL Chain End Tie Down, 2 In. Wide, 27 Ft. Long, Grade 43 Chain W/grab Hook, 3300 Lb Capacity, Reinforced Polymer Coated |
|
Rod End,5/8-11x4 1/2,5/8 Hole,pk10 - CHICAGO HARDWARE Machined Rod End, Male, Black Oxide Coated Steel, Right Hand Thread, Thread Size 5/8-11, Thread Length 2 In, Length 4 1/2 In, Shank Dia. 5/8 In, Boss Diameter 1 1/4 In, Boss Thickness 11/16 In, Hole I.d. 5/8 In, Package Quantity 10 |
|
Rod End,3/8-16x3 3/4,3/8 Hole,pk10 - CHICAGO HARDWARE Machined Rod End, Male, Black Oxide Coated Steel, Right Hand Thread, Thread Size 3/8-16, Thread Length 2 In, Length 3 3/4 In, Shank Dia. 3/8 In, Boss Diameter 3/4 In, Boss Thickness 7/16 In, Hole I.d. 3/8 In, Package Quantity 10 |
|
Rod End,3/4-10x4 1/2,3/4 Hole,pk10 - CHICAGO HARDWARE Machined Rod End, Male, Black Oxide Coated Steel, Right Hand Thread, Thread Size 3/4-10, Thread Length 2 In, Length 4 1/2 In, Shank Dia. 3/4 In, Boss Diameter 1 1/2 In, Boss Thickness 13/16 In, Hole I.d. 3/4 In, Package Quantity 10 |
|
Rod End,3/8-16x3 In,3/8 Hole,pk 10 - CHICAGO HARDWARE Machined Rod End, Male, Black Oxide Coated Steel, Right Hand Thread, Thread Size 3/8-16, Thread Length 1 1/2 In, Length 3 In, Shank Dia. 3/8 In, Boss Diameter 3/4 In, Boss Thickness 7/16 In, Hole I.d. 3/8 In, Package Quantity 10 |
What is the weather like in Chicago, IL at the end of April?
I will be visiting Chicago at the end of April and would like to know what kind of weather to expect. Will I be able to wear flip-flops? Will I need a coat? Whats the average temp?
Really you can never tell how warm or cold it will be here. This morning it was nearly 60 out and tomorow its supposed to snow. Rarely its warm enough for flip flops, and you will need a coat or a sweatshirt at least. Don't forget that its called the windy city for a reason. Also its significantly colder downtown because of the lake front. The good news is there's plenty of shopping around there if you need to pick something up!