Flute Tialn
Flute Tialn
 |
 29 64 SOLID CARBIDE DRILL 3 FLUTE TIALN COAT METREMD 1 3 4 B FR63 VS  US $104.19
|
 Lot of 20 YG Solid Carbide 5 16 TiALN Coated 4 Flute End Mills NEW US $180.00
|
 KEO 7 32 3 FLUTE CARBIDE END MILL 87021 TiALN USA NEW US $18.41
|
 KEO 1 8 3 FLUTE CARBIDE END MILL 87018 TiALN USA NEW US $15.79
|
 3 16 4 FLUTE TiAlN LONG LENGTH CARBIDE END MILL US $15.32
|
 1 4 4 FLUTE TiAlN LONG LENGTH CARBIDE END MILL US $19.16
|
 5 16 4 FLUTE TiAlN LONG LENGTH CARBIDE END MILL US $24.26
|
 3 8 4 FLUTE TiAlN LONG LENGTH CARBIDE END MILL US $31.56
|
 7 16 4 FLUTE TiAlN LONG LENGTH CARBIDE END MILL US $49.24
|
 1 2 4 FLUTE TiAlN LONG LENGTH CARBIDE END MILL US $54.56
|
 5 8 4 FLUTE TiAlN LONG LENGTH CARBIDE END MILL US $95.60
|
 3 4 4 FLUTE TiAlN LONG LENGTH CARBIDE END MILL US $130.04
|
 1 4 FLUTE TiAlN LONG LENGTH CARBIDE END MILL US $205.12
|
 Imported 3 4 x 3 4 x 1 1 2 x 4 4 Flute TiALN Coated Solid Carbide End Mill US $110.00
|
 25MM X 50MM 2 FLUTE HRC45 CUTTING TiAlN MICROGRAIN CARBIDE FLAT ENDMILL US $6.07
|
 5MM X 50MM 2 FLUTE HRC55 CUTTING TiAlN MICROGRAIN CARBIDE FLAT ENDMILL US $11.15
|
 4MM X 100MM 2 FLUTE HRC45 CUTTING TiAlN MICROGRAIN CARBIDE FLAT ENDMILL US $13.23
|
 1 2 4 FLUTE CARBIDE END MILLS 10 PCS TiALN COATED USA MADE 206 001207 US $289.99
|
 1 inch ball end mill solid carbide 99 new TiAlN coated SGS 4 flute US $132.83
|
 QUALITY 1 2 14 NPTF 1 2 Shk Carbide Thread Mill Straight Flute TiALN C961 50014 US $121.82
|
 3 16 4 FLUTE 90° CARBIDE DRILL MILL TIALN COATED USA MADE 208 420187 US $15.73
|
 5 16 4 FLUTE 90° CARBIDE DRILL MILL TIALN COATED USA MADE 208 420312 US $30.00
|
 7 16 4 FLUTE 90° CARBIDE DRILL MILL TIALN COATED USA MADE 208 420437 US $48.15
|
 5 8 4 FLUTE 90° CARBIDE DRILL MILL TIALN COATED USA MADE 208 420625 US $94.71
|
 3 4 4 FLUTE 90° CARBIDE DRILL MILL TIALN COATED USA MADE 208 420750 US $142.52
|
 3 16 4 Flute TIALN Carbide End Mill 5pcs USA US $54.75
|
 1 4 4 Flute TIALN Carbide End Mill 5pcs USA US $61.85
|
 5 16 4 Flute TIALN Carbide End Mill 5pcs USA US $93.25
|
 3 8 4 Flute TIALN Carbide End Mill USA US $19.95
|
 3 4 4 Flute TIALN Carbide End Mill 1pc USA US $76.95
|
 59 64 3 FLUTE SINGLE END TiAlN CARBIDE END MILL US $179.86
|
 29 32 3 FLUTE SINGLE END TiAlN CARBIDE END MILL US $180.90
|
 57 64 3 FLUTE SINGLE END TiAlN CARBIDE END MILL US $181.96
|
 1 2 4 Flute TIALN Carbide End Mill USA US $31.95
|
 7 16 4 Flute TIALN Carbide End Mill 5pcs USA US $148.25
|
 5 8 4 Flute TIALN Carbide End Mill 1PC USA US $49.00
|
 NIAGARA CUTTER 62021 3 4 x3 4x1x3 5 Flute Carbide TiAlN Med Helix End Mill D7 US $79.95
|
 3 4 4 FLUTE 60 DEGREE TiALN CARBIDE CHAMFER MILL US $128.06
|
 1 2 4 FLUTE 60° CARBIDE DRILL MILL TIALN COATED USA MADE US $59.65
|
 1 4 4 FLUTE TiAlN EXTRA LONG LENGTH CARBIDE END MILL US $22.84
|
 1 4 4 FLUTE 60° CARBIDE DRILL MILL TIALN COATED USA MADE US $21.60
|
 1 8 4 FLUTE 60° CARBIDE DRILL MILL TIALN COATED USA MADE US $12.51
|
 3 16 4 FLUTE 60° CARBIDE DRILL MILL TIALN COATED USA MADE US $15.73
|
 3 4 4 FLUTE 60° CARBIDE DRILL MILL TIALN COATED USA MADE US $142.52
|
 3 8 4 FLUTE 60° CARBIDE DRILL MILL TIALN COATED USA MADE US $35.00
|
 1 2 4 FLUTE 60 DEGREE TiALN CARBIDE CHAMFER MILL US $48.06
|
 1 4 3 FLUTE CARBIDE END MILLS 10PCS TiALN COATED USA MADE 205 031140 US $122.50
|
 5 16 4 FLUTE 60° CARBIDE DRILL MILL TIALN COATED USA MADE US $30.00
|
 3 8 4 FLUTE 60 DEGREE TiALN CARBIDE CHAMFER MILL US $33.81
|
 1 2 3 FLUTE CARBIDE END MILLS 10PCS TiALN COATED USA MADE 205 001216 US $309.50
|
 51 64 3 FLUTE SINGLE END TiAlN CARBIDE END MILL US $178.86
|
 5 8 4 FLUTE 60° CARBIDE DRILL MILL TIALN COATED USA MADE US $94.71
|
 7 16 4 FLUTE 60° CARBIDE DRILL MILL TIALN COATED USA MADE 208 420437 US $48.15
|
 49 64 3 FLUTE SINGLE END TiAlN CARBIDE END MILL US $180.40
|
 3 16 4 FLUTE 60 DEGREE TiALN CARBIDE CHAMFER MILL US $17.39
|
 13 16 3 FLUTE SINGLE END TiAlN CARBIDE END MILL US $176.00
|
 31 32 3 FLUTE SINGLE END TiAlN CARBIDE END MILL US $173.78
|
 1 8 4 FLUTE 60 DEGREE TiALN CARBIDE CHAMFER MILL US $12.70
|
 63 64 3 FLUTE SINGLE END TiAlN CARBIDE END MILL US $173.60
|
 61 64 3 FLUTE SINGLE END TiAlN CARBIDE END MILL US $174.90
|
 OSG 3 4 10 10 FLUTE API COBALT PIPE TAP TiALN NEW $217 NO RESERVE PRICE US $39.99
|
 15 16 3 FLUTE SINGLE END TiAlN CARBIDE END MILL US $176.00
|
 5 16 4 FLUTE TiAlN EXTRA LONG LENGTH CARBIDE END MILL US $49.42
|
 27 32 3 FLUTE SINGLE END TiAlN CARBIDE END MILL US $176.56
|
 3 8 4 FLUTE TiAlN EXTRA LONG LENGTH CARBIDE END MILL US $34.80
|
 1 2 4 FLUTE TiAlN EXTRA LONG LENGTH CARBIDE END MILL US $76.36
|
 5 8 4 FLUTE TiAlN EXTRA LONG LENGTH CARBIDE END MILL US $108.50
|
 3 4 4 FLUTE TiAlN EXTRA LONG LENGTH CARBIDE END MILL US $146.32
|
 1 4 FLUTE TiAlN EXTRA LONG LENGTH CARBIDE END MILL US $336.78
|
 SOLID CARBIDE DRILL 72MM 2835 3 FLUTE TIALN COATED US $18.00
|
 3 4 4 FLUTE 90 DEGREE TiALN CARBIDE CHAMFER MILL US $128.06
|
 1 2 4 FLUTE 90 DEGREE TiALN CARBIDE CHAMFER MILL US $48.06
|
 1 4 4 FLUTE 90 DEGREE TiALN CARBIDE CHAMFER MILL US $21.45
|
 3 64 4 FLUTE SE STUB TiAlN CARBIDE BALL END MILL US $10.24
|
 3 16 4 FLUTE 90 DEGREE TiALN CARBIDE CHAMFER MILL US $17.39
|
 3 32 4 FLUTE SE STUB TiAlN CARBIDE BALL END MILL US $9.30
|
 1 8 4 FLUTE SE STUB TiAlN CARBIDE BALL END MILL US $7.78
|
 5 32 4 FLUTE SE STUB TiAlN CARBIDE BALL END MILL US $12.54
|
 3 16 4 FLUTE SE STUB TiAlN CARBIDE BALL END MILL US $12.54
|
 7 32 4 FLUTE SE STUB TiAlN CARBIDE BALL END MILL US $16.78
|
 1 4 4 FLUTE SE STUB TiAlN CARBIDE BALL END MILL US $16.02
|
 5 16 4 FLUTE SE STUB TiAlN CARBIDE BALL END MILL US $21.06
|
 3 8 4 FLUTE SE STUB TiAlN CARBIDE BALL END MILL US $24.28
|
 7 16 4 FLUTE SE STUB TiAlN CARBIDE BALL END MILL US $36.46
|
 5 8 4 FLUTE SE STUB TiAlN CARBIDE BALL END MILL US $71.86
|
 3 4 4 FLUTE SE STUB TiAlN CARBIDE BALL END MILL US $95.68
|
 1 4 FLUTE SE STUB TiAlN CARBIDE BALL END MILL US $185.50
|
 12mm Carbide Endmill 2 Flute Ballnose Long TiAlN US $33.50
|
 1 4 Carbide Roughing Endmill 4 Flute Flat Bottom Regular TiAlN US $15.50
|
 3pcs 1 4 Carbide Roughing Endmill 4 Flute Flat Bottom Regular TiAlN US $45.00
|
 1 32 3 FLUTE SE STUB TiAlN CARBIDE BALL END MILL US $10.24
|
 3 64 3 FLUTE SE STUB TiAlN CARBIDE BALL END MILL US $10.24
|
 1 16 3 FLUTE SE STUB TiAlN CARBIDE BALL END MILL US $9.30
|
 1 8 3 FLUTE SE STUB TiAlN CARBIDE BALL END MILL US $7.78
|
 5 32 3 FLUTE SE STUB TiAlN CARBIDE BALL END MILL US $12.54
|
|
15-pc Carbide Straight Flute Tialn Coated Drill Set, Size 1/16" Thru 1/2" (MONSTER TOOL) STRAIGHT FLUTE CARBIDE DRILLS 15 PC SET FRACTIONAL SIZES 1/16" TO 1/2" USA MADE Material: Solid Carbide, Sub-Micron C-2 grade premium carbide with 10% Cobalt content CETS PN: 470-15PC32B Finish/Coating: TiALN Material: Solid Carbide Point Angle: 140° Notched FEATURES RHC (Right Hand Cut) Specifically designed for increased edge strength and precision tight tolerance holes Capable of producing reamer type finishes in work hardened and abrasive materials such as chrome alloys, heat treated alloys, nickel alloys, titanium alloys, steel and stainless steel weldments. INCLUDED SIZES, 1 OF EACH 1/16 CARBIDE STRAIGHT FLUTE DRILL TiALN COATED 3/32 CARBIDE STRAIGHT FLUTE DRILL TiALN COATED 1/8 CARBIDE STRAIGHT FLUTE DRILL TiALN COATED Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. |
|
(6pc) 8mm Carbide Extra Long Tialn Coated 4 Flute Ball Nose End Mills (lot296) Lot of 6 BRAND NEW High Quality 10mm x 15mm x 100mm Micrograin Carbide 4 Flute TiALN Coated End Mill 30 Deg Helix Korean Made MSRP $60.00 Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. |
|
1" 4-flute Ball Nose Carbide End Mill Tialn Coated Usa Made MONSTER TOOL USA MADE 1 BALL NOSE CARBIDE END MILL Material: Solid Carbide Sub-Micron C-2 grade premium carbide with 10% Cobalt content Part Number: 223-001163 End Shape: Ballnose Length: Regular Flutes: 4 Diameter: 1 Decimal Inches: 1.000 Length Of Cut: 1-1/2 Shank Diameter: 1 Overall Length: 4 Finish: TiALN COATED Helix: 30 RHS/RHC (Right Hand Spiral - Right Hand Cut)Center Cutting PKG QTY: 1 PC Powered by ProStores Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. |
|
5pcs 1/2" Tialn Coated 4 Flute Single End Carbide End Mills, $23.99 Each 5pcs 1/2" 4 Flute Single End TiALN Coated Carbide End Mills Very Good quality, German Carbide Blanks Ground in Korea and TiALN Coated in the USA 1/2" Diameter, 1/2" Shank, 1" Length of Cut,3" Overall Length Brand New in Original Package Pricing comes out to only $23.99 Each!Our Part Number YG1-50004FLTA Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. |
|
3/4" - 4 Flute 60° Carbide Drill Mill Tialn Coated - Usa Made MILL MONSTER Drill Mill USA MADE 3/4 - 4 Flute 60 Drill Mill-TIALN Coated Material: Solid Carbide Sub-Micron C-2 grade premium carbide with 10% Cobalt content Part Number: 208-647503 Product Features Fractional Size 4 Flute 60 Included Angle Single End Finish: Tialn Coated RHS (Right Hand Spiral) RHC (Right Hand Cut) Dimensions Diameter: 3/4 Length Of Cut: 1-1/2 Shank Diameter: 3/4 Overall Length: 4 PKG QTY: 1 PC Powered by ProStores Earn 2% eBay Bucks on qualifying purchases! Backed by eBay Buyer Protection Program. Terms and Conditions apply. |